Rotted plywood and soaked carpet don't just look bad — they add dead weight, trap water against your tubes, and quietly rust out the deck you're standing on. We tear it out and rebuild it in aluminum and marine-grade vinyl, right at your slip or in our shop.
We work on the decking, the framing underneath it, and the tubes it's all bolted to — not just whatever's visible from the dock.
Strip the old plywood or aluminum down to the frame, rebuild it square, and finish with your choice of decking material.
4–7 DAY TURNAROUNDWoven or foam-backed marine vinyl bonded over new aluminum or marine plywood. Cooler underfoot, seamless seams.
15+ COLOR OPTIONSCross-member rust, soft spots, and bent frame sections addressed before new decking ever goes down.
WELD + INSPECTWaterlogged foam adds hundreds of pounds and hides corrosion. We check it, dry it out, and refill where needed.
INCLUDED W/ FULL REBUILDReinforced mounting points cut and sealed for helm bases, cleats, gates, and built-in seating — before the finish coat.
CUSTOM LAYOUTWritten condition reports on decking, framing, and flotation — useful for claims, surveys, or a boat you're about to buy.
SAME-WEEK REPORTMost full deck replacements move through the same sequence — here's what happens and roughly how long each stage takes.
We check tubes, frame, and foam, then send a written quote with material options. No charge, no obligation.
Carpet, vinyl, or plywood comes off down to bare frame so we can see exactly what's underneath.
Rusted or bent cross-members get welded, replaced, or reinforced before anything new goes on top.
Aluminum sheet or marine plywood goes down first, then your chosen top layer — vinyl, composite, or coated aluminum.
Edges sealed, furniture reset, and a final walk-through with you before she goes back in the water.
Every rebuild starts with an aluminum or marine-ply subfloor. From there, pick the top layer that fits how you use the boat.
Marine-grade, treadplate or smooth finish. Lightest option, won't rot, 20+ year lifespan.
FROM $38 / SQ FT INSTALLEDCool underfoot, drains fast, textured for grip. Bonded over aluminum or marine ply.
FROM $52 / SQ FT INSTALLEDThe classic dock look without the rot risk — capped composite boards over an aluminum frame.
FROM $46 / SQ FT INSTALLEDEvery quote is based on an in-person or photo inspection — these ranges cover a standard 20–24 ft tri-toon. Final pricing depends on frame condition and material choice.
Not fiberglass hulls, not outboards — just pontoon and tri-toon decking, framing, and flotation. That focus means we've seen the same rot patterns, the same rust-prone cross-members, and the same weak points hundreds of times over, on everything from weekend runabouts to commercial tour boats.
Every rebuild is quoted in writing before we touch a bolt, and every full rebuild carries a 10-year structural warranty on the frame and decking.
"Our deck was soft in three spots and we didn't even know it until they showed us. Aluminum rebuild took five days and it's stiffer than it was new."
"Quoted us in person, held the price, and the vinyl color match to our bimini was exact. Would use again."
"They caught frame rust our marina's tech missed during a pre-purchase inspection. Saved us from buying a problem."
Send a few details about your pontoon and we'll follow up with a quote — usually within one business day. Photos of the current deck help but aren't required.